Új Stiler ŁUPARKA SPALINOWA 22 TONY BRIGGS & STRATTON LOG SPLITTER fahasogató

Strong mobile log splitter STILER 22 T with a BRIGGS & STRATTON engine with a capacity of 6.5 HP and a capacity of 208 cm3.

The high power of the splitter makes the machine easily handle the hardest types of wood such as oak, beech, hornbeam. The knots in the tree are not a problem.

NEW MODEL WITH ENGINEERED BRIGGS & STRATTON BRAND.
Technical data:

    WORKING MODES: Vertical
    STRENGTH OF THE STRESS: 22 TONS
    POSSIBILITY OF WOOD TIMING: 2 PARTS
    WORKING CYCLE: 12.5 SEK + BACK
    ENGINE: BRIGGS & STRATTON 6.5 HP (208 CM3)
    MAX. LENGTH: 635 MM
    CYLINDER: 10CM X 59CM
    HYDRAULIC PUMP: 2-SECTION (HI-LO TYPE), 31L / MIN AND 240 BAR PRESSURE;
    OIL TANK: 14.5L
    BUCKLE: BALL FOR THE CAR HAKE, QUADA: 50MM
    WORK WEDGE: FEEDBACK AND AUTOMATIC RETURN
    WHEELS: 16 "[4.8 X 8]
    WEIGHT: 260 KG
    TOTAL DIMENSIONS: 228x114x122cm

Included:

    A complete machine
    User manual
    CE certificate

Specification:

    Intended for splitting short "fireplace" wood. Stable, solid construction ensuring excellent results. Two-handed operation guarantees work safety.
    This model is used for splitting timber with a length of max. 63.5 cm. The work is really stable and comfortable.
    Construction and work in a vertical position.
    The splitter is equipped with a solid BRIGGS & STRATTON 6.5 HP (208 CM3) engine.
    Very fast work cycle of 12.5 seconds + return!
    The splitter is equipped with a ball grip, which allows it to be easily transported in the household.
    NEW: A MACHINE EQUIPPED WITH A LIFTING SYSTEM DIRECTLY TO WEDGE

Powerful BRIGGS & STRATTON 6.5 HP GASOLINE engine (208 CM3). Provides a long machine life.
The big advantage of the model is the vertical operation mode. This solution makes it easier to split the largest and heaviest pieces without having to lift them.

The ball holder makes it easy to transport the machine on the farm. 50 mm clip ideal for the car, quad.
The control panel consists of 3 levers. Two responsible for leaving the wedge. The third one is used to release the mechanism of lifting the tree to the vertical under the wedge
rębak stiler eco 13
Powerful wood chipper STILER ECO13.
Chipper with a 15 HP engine. Ideally suited for shredding branches up to a maximum diameter of 8 cm.
The machine is equipped with larger knives, a heavier flywheel, a larger feed opening and pours than other similar products. These features ensure better efficiency of chipper operation. Shorter working time makes woodworking fast and comfortable.

Technical data:
Model: eco-13
Dimensions of the side hopper of the chipper: 475x305 mm
The output of the hopper was taken by chipper: 80x125 mm
Knife speed: 2400 rpm.
Feeder feed opening: 475 x 475 mm
The capacity of the grinder: 330x165 mm
Dimensions of the chopper hopper: 600x425 mm
Max. branches diameter: 8 cm (chipper), 3 cm (crusher)
Hammer shredders: 24x8 mm
Diameter of the dial: 380mm
Size of chips: 19 mm or 38 mm
Engine type: 420 cm3, ohv, 4-stroke
Starting the engine: manual, manual, battery
Displacement: 420 cm3
Output power: 15 hp, 3600 rpm.
Engine speed: 3600 rpm.
Capacity of the fuel storage compartment: 6.5 l
Oil tank capacity: 1.1 l
Fuel type: unleaded petrol
Transfer of powers: double drive wires
Weight: 210 kg

Specification:
A new generation of engine OHV, 4-stroke engine with a power of 15 hp.
The chipper has two hoppers. The upper rams 24 is used for the size of small branches 3 cm, leaves, cardboard. The side set equipped with knives on the disk is used to crush the branches to 8 cm.
They are made of long-lasting materials.
Wood chipper is equipped with a rotor having a diameter of 15 mm, producing two knives with a thickness of 20 mm.
Construction of the chipper storage chips of 19 mm or 38 mm
Easy transport thanks to large rubber wheels.